Four years ago the Ruger Precision Rifle struggle the scene and changed how us view manufacturing facility rifles. Over there were countless compelling things around that rifle, yet the most essential was the price tags – $999.99. Other rifle manufacturers took an alert and have since started a tendency of more affordable, but accurate factory rifles.

You are watching: Bergara b14 hmr vs ruger precision rifle

Bergara assumed the market needed something prefer a tradition barreled activity dropped right into something choose a McMillan A5 that expense somewhere approximately $1000 and needed no other work – with those needs in mind, they introduced the Hunting match Rifle (HMR). To develop it, Bergara assembled a team of employee to assist design a rifle the they, significant enthusiasts and also former military, would certainly be ready to in reality own and also shoot. The end an outcome is a harmonious marriage between shooter and accountant that appears to satisfy all. 


I an initial shot the HMR at SHOT show 2017 selection Day. To mine surprise, it to be nice and comfortable and I had no trouble hitting enormous torso-sized targets at a quarter-mile, even in 20 mph winds. Shortly thereafter, this tester HMR came down on my FFL. In the previous two years, I"ve shot that informally at both record and steel and formally at a weekend precision rifle class. The heap of dirty brass in my reloading room speak me the the total round counting is approaching 700 rounds.

Bergara HMR .308 $949.99 Bergara HMR .308 $


Most of my measured five-shot groups across a variety of factory ammo species resulted in .7 to 1.1 MOA. In one case, using Hornady"s 140 gr. Factory A-Max load, i shot six back-to-back five-shot groups that measure under .9 MOA. If girlfriend cherry pick three-shot groups, this is a half MOA gun. If you run in reality, this is a trustworthy sub-minute rifle.


During the previously mentioned weekend class, ns took the HMR and also a much much more expensive Remington 700 put on a 308 success chambered rock Creek barrel and a McMillan A5. I placed 250+ rounds through both rifles over the course of 2 days and also came away impressed with the HMR, especially contrasted to a worked over Remington 700. In the end, my .308, despite chambered in a virtually dead and also archaic cartridge, hit more targets. At 3 times the price of the HMR– I"d expect it to perform that!


The HMR supplies Bergara"s B14 action, a Remington 700 clone, update to resolve some common issues and problems v the factory 700 action, consisting of it"s (lack of) left-handedness.

First, a stronger bolt stop. Word on the net is the a stressful pull on the bolt, like in compete or gunfight, might break the flimsy stock stop on a 700, bring about the bolt gift yanked best out the back. Bergara addresses this by complete a lot stronger bolt avoid right from the start. No must fumble around near the trigger to relax the bolt, simply pull it come the stop, push the huge lever on the left-hand side of the action, and remove the bolt.


Second, they"ve modernized the bolt knob. Assuming her 700 knob isn"t one of those that"s filled with air pockets from poor casting, you have the right to pay a gunsmith come thread it and also screw on a large knob from somebody reputable. Bergara object the handle and also screws on their own big knob best from the factory.


A 2 lug coned bolt is advertised to sell smoother, an ext reliable feeding. I had no problems feeding indigenous the provided magazine lock send with the gun. You"ll also notice that Bergara has elected to punt the puny 700 style extractor for something through a bit more strength. This is one more common upgrade her gunsmith will happily fee you for, despite they"ll most likely go to either a Sako or M16 layout extractor. Bergara uses a Savage style extractor. It"s not a Sako/M16/Mauser claw, but it"s may be a little bit nicer than the stock 700, and worked fine throughout the duration of this review. 

Early operation of the B14 activity like the one reviewed here had actually a shoot pin the was a touch undersized and allowed the inside wall to “flow” a bit earlier than you"d check out with an additional action. Factory Hornady ammo mirrors what looks favor primer cratering where other actions don"t. Bergara"s VP that Sales, Ben Fleming comment to allow me understand that Bergara has addressed this issue: 

“One fast note to upgrade you on is the firing pin and also firing pen hole. We adjusted the tolerances means down ~ above this throughout the later half of 2018 and also everything in 2019 will certainly be smaller sized to prevent the need for bushing firing pins prefer you indicated. We absolutely listened to the users and our industry on that one.”

You can likely pay a gunsmith to bush the bolt for much less than $200. If you just shoot factory ammo, this likely won"t be a difficulty for you. If girlfriend reload, and also you favor to press it, you operation the risk of blow a primer and potentially resulting in a most damage.

A gunsmith I recognize got very early vintage HMR action to play with and also reported that it needs blueprinting prefer a factory Remington 700. This will only come up at rebarrel time. Relying on the male running the lathe, this deserve to be $100 – $300.

Bergara solved every concern that the bean counters at Remington created. It"s no a Stiller, however it is MUCH far better than a factory 700 and I"d argue is a much far better place to start if you"re planning upgrades down the road. Once upgrade time comes, the most you could possibly execute is true it, shrub it if it"s pre-mid-2018, and convert it come a Sako/M16 extractor. 



Bergara uses the short activity HMRs in a range of barrel lengths and also chamberings for both right and also left-handed shooters. Oddballs incorporate a 1:9 twisted 22-250 and also a 20-inch 1:24 .450 Bushmaster. Most commercial rifles in 22-250 use a much slow twist – 1:12 or 1:14. The 1:9 must be fast enough to stabilize bullet weights approximately 80 grains. Proficient reloaders have the right to safely press 75 gr bullets come 3000+ fps. That"s one hell the a varmint rifle, particularly with a deserve to screwed to the end.

In a long action, there"s a 24-inch 1:9.5 twisted 7mm Rem Mag and also left and also right-handed 26-inch 1:10 twisted 300 win Mags. Both feed from AICS magazines. 


Like most short action rifles you"ll check out at a weekend match, this one feeds off AICS magazines. Bergara has a 5-round Magpul magazine, a nod I"m certain to the reduced profile forced for a hunter. Feeding from that magazine is flawless. Bergara"s bottom metal is well thought out and seems to eschew a huge single lever like Badger"s M5 in favor of a lower profile ambidextrous paddle style. I like it and also didn"t uncover that that caused any issues v magazine changes.

In a nod to the classics, Bergara has chosen to go with a curved trigger vs. The much an ext tactical flat-faced triggers you watch in today"s market. Bergara"s hand-operated says the cause is flexible from 2.8 to 4.4 pounds and also is collection a notch above 3.5 lbs from the factory. The cause that came in this gun originally measured at 6 pounds. I called Bergara and they sent me a new one the measured in ~ 3.5 pounds. The replacement trigger adjusted within the range specified and passed a autumn test. It"s a 700 pattern trigger, therefore if you hate it, you deserve to punt it and replace that quickly. Friend shouldn"t though since it"s a perfect fine trigger and also doing so will certainly disqualify you from Production course in PRS.


I very own one specialized match rifle and also it attract a McMillan A5. If finances allowed a 2nd match rifle, it would wear one A5 as well. However I"ve pursued with that rifle and found the the A5 is a poor stock for a searching rifle. Compromises must be made and Bergara walk a good job.


I"ll start with the only huge negative. You have to lower the cheekpiece to eliminate the bolt for cleaning. This is a first-world problem. Fix this by either noting your perfect adjustment on the shaft or taking a Dremel to the cheekpiece. The cheekpiece needs no tools to readjust for comb height and also is symmetry so no adjustments are vital for support side shooting. My face seems to need a greater than normal comb on all rifles, however I had actually no problems adjusting the cheekpiece for intake with a 50 mm target scope in a set of tall rings. 


Length of pull is modified making use of spacers between the stock and also the buttpad. 3 spacers are included. If you"re yes, really lanky, you can purchase added spacers from Bergara for $5. The buttpad is squishy and also helps soak increase the recoil the 6.5 Creedmoor.

The buttstock is what"s well-known in the precision rifle game for shooting turn off a rear bag v your hand-hooked in on the stock. A pure searching stock would certainly smoothly shift from target to grip and have no hooks that could snag on branches or gear. It would certainly probably additionally be walnut. That"s fine, this is a enhance rifle that periodically hunts, no the other means around.


With the present of a standard hunting stock, the forend tapers nicely while offering a level bottom favor a match rifle. There"s part nice texturing for her fingers, and also the end an outcome is a stock that"s satisfaction to shoot offhand, turn off a bipod, or sandbag. Bergara has thoughtfully molded in QD swivels on both political parties of the buttstock and the forend – an excellent for transferring the rifle flat throughout your earlier on a lengthy hike. No QD swivels or pic rail ~ above the bottom the the forend. Instead, Bergara put two timeless swivels to match the timeless one ~ above the buttstock. 


Bergara calls this a #6 taper in their literature which i assume is a Krieger #6 heavy Bull Sporter. It"s a profile that manages to it is in beefy enough for complement use while still cutting enough weight the you won"t hate yourself when you carry it top top a hunt. Your eyes room not deceiving you, the barrel is ever before so contempt off-center in the stock. Functional impediment? no unless you have crippling OCD and also this sort of thing sends you into a spiral.


The genuine star that the show is something you can"t see. That is unless you peel off many of the share to reveal the fat chunk the aluminum that comprises the skeleton the the HMR stock. This a very great thing. The factor chassis are the hotness in PRS/NRL? They"re stiff and therefore an extremely strong. The mini chassis idea isn"t new, but it"s really rare to view in a mass-produced firearm, and rarer still is one the hits the roadways for much less than $1000.

See more: Suicide Squad Rolls Out The “ Ballroom Blitz Rocky Horror Picture Show ?


What the is: one accurate, magazine-fed bolt activity rifle, readily available in a dizzying selection of long and short action chamberings as well as left and also right-handed versions. 

Who is that for: Those looking to dip their toes in precision rifle competitions. Hunters that care about a shooter oriented rifle. 

What i found: Not quite custom, but better than most factory rifles. It"s based on the Remington 700 footprint, so equipment abound. If you choose to load your own ammo past max, friend should yet a 2019 rifle. Otherwise, to buy it, mount a scope, and also shoot it until the barrel is worn out.

Retail Price: $1150 – $1179

Street price: $949-$999

Bergara HMR .308 $949.99 Bergara HMR .308 $